User's Manual

Installation
Preface -Truck cabin Installation .
Tanker Truck Monitoring System- User’s Guide 36
3.3 Preface -Truck cabin Installation .
NOTE: Installation should be performed by a certified car electrician and according to all
applicable standards.
3.3.1 Preparing the Cabin
Begin by unscrewing the dashboard covers on the passenger half and laying it bare in order
to locate the place in the dashboard that contains the least number of wires and
connections. This is usually on the side of the passenger, since on the driver’s side, all the
clocks and sensors are located.
3.3.2 Interconnecting the Units
Figure 3-7. TTMS Architecture
3.4 Truck Cabin Installation
The installation procedure in the cabin consists installing the electronic units: AVL Reader, AVL
Unit (GPRS Modem), and external antenna with a magnetic base (connected to the AVL Reader),
GSM Antenna, Protection unit and LED Display unit.
1. Open the Dashboard.
2. Place and install AVL Reader and Protection unit in upper front storage compartment
(dashboard).