User's Manual

Initial System Setup
Configuring the Seals
Tanker Truck Monitoring System- User’s Guide 17
2.4 Configuring the Seals
NOTE: Install the Seal Setup application on the computer from which the system will be
configured.
1. Connect a computer running the Seal Setup application to an AVL Reader through an RS232
cable.
NOTE: This does not necessarily have to be the AVL Reader installed on the truck.
Figure 2-1. RS232 Connection to AVL Reade
2. Launch the application Seal Setup application. The following window appears.
PICTURE OF AVL READER TO COMPUTER
CONNECTION