User's Manual

Initial System Setup
Configuring the Seals
Tanker Truck Monitoring System- User’s Guide 18
3. Define the communication parameters between the AVL Seal Config application and the AVL
Reader as follows:
• Click the Ports button. The following dialog appears.
• In the AVL Reader field, select the COMM port corresponding to the computer port to
which the AVL Reader is connected.
NOTE: The seals may also be configured using a DataPort. If a DataPort is connected, define the
LFT field.
• In the AVLR Connector field, select….
• Click Apply. The AVL Seal Config window is invoked.
4. Clear the Screen by clicking the Clear button and then checkmark each relevant location
(C1, C2, C3, etc. for hatches and V1, V2, V3 for valve).
NOTE: Only the checkmarked location will be available for configuration.