User's Manual

Setup and Analysis
Overview
Tanker Truck Monitoring System- User’s Guide 39
4
S
S
e
e
t
t
u
u
p
p
a
a
n
n
d
d
A
A
n
n
a
a
l
l
y
y
s
s
i
i
s
s
4.1 Overview
The Setup and Analysis SW tool is used for commissioning the TTMS system and verifying that
the system units have been installed correctly. The Setup procedure includes the following steps:
1. Launch the application and connect the RS232 cable to the AVL Reader.
2. Defining the tank seal IDs of the truck
3. Configuring application parameters
4. Verifying that the LED Seal Status Indicators are operational
5. Interrogating the seals and verifying response
6. Configuring the Readers’ site coordinates
The steps above complete the installation procedure.
4.1.1 Launching the Application
• Connect computer to AVL Reader through an RS232 cable.
• Launch the Setup application
4.1.2 Defining Seal Ids
The seals securing the tanker hatches and valves must be defined.
To define seal IDs
1. Click the Truck Configuration tab from the menu toolbar. The following window appears.
LCU = identification of STARCOM ID No. label
ID 07324 = Tank ID (use Replace ID to change)
Enter each seal ID where TF: are the common first letters of all seals and the rest are the
individual numbers. Seal Status Indicator serial number and version are read.
If changes are made, click Replace to update reader with new info.
Add tank – if