User's Manual

Hi-G-Tek Ltd. Wireless Monitoring Platform for Security & Management Pg.3
2. Introduction
The DataTag uses active RFID(Radio Frequency Identification) wireless monitoring
technology and includes a transmitter/receiver unit, read/write capability, real-time
clock, memory and sensing circuitry to detect any attempt at tampering with the tag.
It uses two RF channels (L.F, H.F) for communication: In low-frequency short-range mode
(125 KHz) the DataTag logs and communicates data through a handheld terminal
/microreader. In High frequency long-range mode (916MHz or 433MHz) the DataTag logs
and communicates data through a Data Reader (long-range monitoring and automatic
Data collection)
3. Installation Instructions
The DataTag is delivered with a set
of double-sided tapes that are used
for placing the DataTag on the
tagged object.
The Sensor Plate (item #1) is supplied
separately from the DataTag.
To place the Sensor Plate peel the paper
from the double-sided tape (item #2) and
place the Sensor Plate in its place.
1 2
Press the sensor Tape to create the contact
between the tape and the sensor Plate.
Make sure the contacts at the bottom part
of the plate are aligned with the pins.