User's Manual Part 1
Table Of Contents
- Page 1
- Page 2
- Page 3
- Page 4
- Page 5
- Page 6
- Page 7
- Page 8
- Page 9
- Page 10
- Page 11
- Page 12
- Page 13
- Page 14
- Page 15
- Page 16
- Page 17
- Page 18
- Page 19
- Page 20
- Page 21
- Page 22
- Page 23
- Page 24
- Page 25
- Page 26
- Page 27
- Page 28
- Page 29
- Page 30
- Page 31
- Page 32
- Page 33
- Page 34
- Page 35
- Page 36
- Page 37
- Page 38
- Page 39
- Page 40
- Page 41
- Page 42
- Page 43
- Page 44
- Page 45
- Page 46
- Page 47
- Page 48
3.1.3 Wiring the Outdoor DataReader
Hi-G-Tek Ltd. Microelectronics & Asset Tracking Technology
32
DataReader Installation
3
The DataReader may be connected to the network via three types of
serial communication:
RS485 Full Duplex1.
RS485 Half duplex.2.
RS232 (different model number)3.
According to the DataReader model in use, the serial connection
can be either RS232 or RS485 (see Technical Specifications).
When the reader is connected using RS485, it can be set by the user
to full duplex mode or half duplex mode by altering the switch
configuration. For further information see sections 3.1.4.-3.1.6.
Switch Position
ON
OFF
TB3
TB1
S1 S4 S2 S6
S3
TB2