User's Manual Part 3
Table Of Contents
- Page 1
- Page 2
- Page 3
- Page 4
- Page 5
- Page 6
- Page 7
- Page 8
- Page 9
- Page 10
- Page 11
- Page 12
- Page 13
- Page 14
- Page 15
- Page 16
- Page 17
- Page 18
- Page 19
- Page 20
- Page 21
- Page 22
- Page 23
- Page 24
- Page 25
- Page 26
- Page 27
- Page 28
- Page 29
- Page 30
- Page 31
- Page 32
- Page 33
- Page 34
- Page 35
- Page 36
- Page 37
- Page 38
- Page 39
- Page 40
- Page 41
- Page 42
- Page 43
- Page 44
- Page 45
- Page 46
- Page 47
- Page 48
- Page 49
- Page 50
- Page 51
- Page 52
Hi-G-Tek Ltd. Microelectronics & Asset Tracking Technology
160
6
RS 485/232 Communication Protocol
6.5.5.12. Get Reader's Baud Rate.
6.5.5.12.1. Command Transmision
This command places the Reader in a sleep mode of operation
to save energy. The Reader will wakeup from this mode by
receiving a Wakeup command.
LSC > Reader
STX #B R# (0000) CMND (0 0f f h) R_ID CRC ETX
1 2 2 2 4 2 1 # of bytes
6.5.5.12.2. Get Reader's Baudrate Response.
The following string is the response:
Reader > LSC
STX #B R# MSGT(80ff h) R_ID baudrate CRC ETX
1 2 2 2 4 4 2 1 # of bytes
Baudrate: 2400, 4800, 9600, 19200, 38400
6.5.5.13 Set Reader's Baud Rate.
6.5.5.13.1. Command Transmission
This command puts the Reader in a sleep mode of operation to
save energy. The Wakeup command wakes the Reader from this
mode. The baudrate is updated after the completion of this
command and receipt of the response.
LSC > Reader
STX #B R# (0000) CMND (00fe h) R_ID baudrate CRC ETX
1 2 2 2 4 4 2 1 # of bytes
The baud rate is interpreted as a decimal number translated
into a 32 bit binary number or vise-versa.