User's Manual

1
Introduction
Hi-G-Tek Ltd. Microelectronics & Asset Tracking Technology
21
In the stationary configuration, the unit is mounted on a flat stationary
surface such as a wall or pole. A typical installation of this configuration
is at the point of exit from ports, customs terminals, warehouses, etc.
This operation mode allows monitoring of the seal at predetermined
sites and checkpoints.
In the mobile configuration, the unit is mounted in the truck cabin.
The DataReader monitors the seal during the entire journey, and reports
its status via the vehicle's communication system to the control center
in real-time.
The DataReader is mastered by a host computer. Once installed, the
unit waits for commands coming from the host computer.
The DataReader may be used in both stationary and mobile
configurations.
Upper Compartment:
Electronics Bay
Lower Compartment:
Cable Connection
Antenna
LED Indicators
Outdoor DataReader