User Manual

Chapter 7 Evaluation Software
Hi-G-Tek Ltd. Micro electronics & Asset Tracking Technology - 125 -
shown in Figure 7-1.
Figure 7-1 shows the Te s ts window. In
order to perform the built-in test, first
select the DataReader you want to test
from the Rea de r drop down list (It em
#1). Then click on the Execute Built-In
Te s t button. If you only want to get the
results of the last performed test, click
on the Get Current Reader Status
button.
The Vol tage Value s box (Item #2)
displays the actual values measured by the DataReader: The first value
(2.544 in the example) represents the voltage value of the MCU, the second
(0 in the example) represents the voltage value of RF Modem #1 (not
installed) and the third value (2.56 in the example) represents the voltage
value of RF Modem #2.
Item #3 displays the status flags of the DataReader. A flag that is on
appears red, while flags that are off appear black.
7.7.2 Authorization Levels and Passwords
Some feat ures in t he Evaluat ion Software are meant t o be used only by
advanced users or by Hi-G-T ek's dist ributors. To prevent unauthorized
users from accessing the advanced features, the software requires a
password. The software recognizes 3 levels of authorized users: User (the
default ), Administ rat or and Dist ributor. This manual does not cover t he
feat ures that are available only to Dist ribut ors.
Note:
The levels of authorization, passwords and log-ins of the Evaluation
Software are completely separate from the user permissions, passwords and
log-ins which are used by the operating system.
Figure 7-1