User Manual

Chapter 7 Evaluation Software
- 126 - Hi-G-Tek Ltd. Micro electro nic s & A sset Tra cking Techno logy
7.7.2.1 Logging-in Using the Desired Authorization Level
After the software is installed, it does not request a password and is
automatically activated using the User authorization level (the lowest). In
order to log in with a different level of authorization, do the following:
 Open the Options dialog (shown in Figure 7-1) by choosing Options
from the Tools menu, as shown in Figure 7 -1.
 Clear the check box labeled Always
l ogin usi ng th is use r type and
password (it em #1 in Figure 7-1)
 Click OK to close the Options
dialog window.
 Restart the Evaluation Software
(exit the software, the run it again).
 You should now see the Login
dialog window as shown in Figure 7
-1 . Choose the desired authorization
level from the Lo gi n a s drop down
list, type the appropriate password
in the Password box and click OK.
The Default password for User is empty
(no password), and for Administrator is
"Admin".
7.7.2.2 Changing Passw ords
In order to change a password for a
particular user type (authorization
level), you must be logge d in t o t he
Figure 7-1
Figure 7-1
Figure 7-1