User Manual

Chapter 8 System Parameters and Comm ands
Hi-G-Tek Ltd. Micro electronics & Asset Tracking Technology - 151 -
Access
Read-Only
Description
Returns a bit field of the flags that
represent the status of the DataSeal.
Constant in
HGTSe alParameterC ode Enum
HGTLongStatus (7)
Verify Mask in
HGTVerifyMaskEnum
HGTLongStatusVerifyMask (100h)
Data Type
HGTSe alLongStatusBitEnum (Long)
Remarks
This parameter contains all the status flags of the DataSeal (including these
t hat are p ar t of t h e Short Status parameter).
Use the constants in the HGTSe al LongStatusBitEnum enumeration to
determine the state of the specific flags. Each flag has also a corresponding
boolean property in the Seal object.
Even though this parameter is read-only, some of the flags can be set using
the Set Status co mm an d ( Seal .SetStatus).
Section 8.2.1 contains descriptions of the various flags.
Low Battery Error Threshold
Seal O bject Property
LowBatteryErrorThreshold (Hidden
property)
Access
Read-Only.
Description
The highest value of the battery voltage
that will cause the Low Battery Error
st at us flag to be set .
Constant in
HGTSe alParameterC ode Enum
HGTLowBatteryErrorThreshold
(61h).