User Manual

Chapter 2 Quick Start
Hi-G-Tek Ltd. Micro electronics & Asset Tracking Technology - 31 -
After about 5 seconds, you should see a green "Set OK" message in the
Result box (in the upper left side of the window). If you see a "Set Failed"
message instead, it means that the Sealing Wire is not properly closed. If
you see a different message, refer to chapter 0 for troubleshooting.
P erform another Verify interrogation (click the Single Interrogation
button). You should see now that both the Tampered (S/T) and Opened
(O/C) flags are clear (black), just as they were in the beginning.