User Manual

14
Steel Standard Bar: Keep
the front and back edges
lightly lubricated and free
from dirt and rust.
Pitman Pin: Damage to the
handle socket will occur if not
lubricated
Shear Bolt: Wear to the bolt will oc-
cur if not lubricated
Climbing Pins: Keep clean and lubri-
cated and free from dirt and rust
Springs: Keep clean and
lubricated and free from
dirt and rust.
Important! Do not use motor oil
or grease to lubricate the jack.
Repair
If you need to repair your jack, use only genuine Hi-Lift parts. Using parts not supplied by Hi-Lift
®
Jack Com-
pany will make the jack unsafe for use and void the warranty. Hi-Lift
®
will repair a damaged jack. Pack the
jack in a carton and send prepaid to the address below:
Hi-Lift
®
Jack Company
Factory Service Department
46 West Spring Street
Bloomfield, Indiana 47424
The repaired jack will be returned to you via USPS, UPS or Fed Ex.
Maintenance Instructions
Lubrication
Using the jack without proper lubrication will result in poor performance and damage to the jack. The jack is
not self-lubricating, inspect the jack before use and lubricate when necessary. After cleaning, lubricate the
jack using light penetrating oil, or a silicon or Teflon spray at the following points:
WARNING
!