User's Manual
Table Of Contents
- 1.1.Product Introduction
- 1.2.Product Features
- 1.3.Technical Specifications
- 1.4.Pin introduction
- 1.5.Product packaging
- Figure 1 HLK-B36 package size
- 1.6.Block diagram
- 1.7.Testboard description
- 1.8. Power requirements
- 1.9.WIFI transmission power consumption
- 1.10.WIFI receiving power consumption
- 1.11.Power consumption in each working mode of WIFI
- 1.12.Output power in each mode of WIFI
- 1.13.Receiving sensitivity in each mode of WIFI
- 2.Function description
- 3.ATAT command instructions
- 3.1.Query the current module version:at+ver
- 3.2.Local port operation:at+CLport
- 3.3.Set up the serial port:at+uart
- 3.4.SET DHCP:at+dhcpc
- 3.5.Set wifi connection mode:at+netmode
- 3.6.Set TCP connection mode:at+mode
- 3.7.Set the remote IP when the module is used as a cli
- 3.8.Set the remote port when the module is used as cli
- 3.9.Set parameter submission:at+net_commit
- 3.10.System restart /exit at command mode:at+reconn
- 3.11.Set the ssid and password of the module:at+wifi_co
- 3.12.Set the socket connection protocol:at+remote pro
- 3.13.Set network connection parameters：at+net_ip
- 3.14.Query STA mode network connection status：at+wifi_C
- 3.15.Query module MAC address :at+Get_MAC
- 3.16.Set the framing length：at+uartpacklen
- 3.17.Set framing time：at+uartpacktimeout
- 3.18.Set Bluetooth name：at+ble_name
- 4.AT command control code routine
- 5.Restore factory settings method
- 6.Bluetooth data transparent transmission
- 7.Bluetooth distribution network
- 8.Electrical characteristics
- 8.1.Electrical parameters
- 9.Appendix A Document revision history
第
7
页 共 34 页
1.10. WIFI receiving power consumption
Mode
Speed
Current（ma）
11b
11Mbps
100
11g
54Mbps
100
11n
MCS7
100.5
1.11. Power consumption in each working mode of WIFI
State
Description
Average current
（3v3）
Maximum current（3v3）
Unit
wifi
initialization
Turn off the radio, the
MCU is at full speed
45.2
46.3
ma
Keep wifi
connection
Keep connected to the
router
101
342
ma
Udp sending
After connecting to the AP,
send packets at full speed
through UDP
93
363
ma
SoftAP
SoftAP networking status
100.5
193.7
ma
SmartConfig
Module distribution
network status
100.8
129.5
ma
1.12. Output power in each mode of WIFI
Paremeters
Minimum
Typical value
Maximum
Unit
RF average output power,802.11b cck Mode
11m
-
17.5
-
dBm
RF average output powe,802.11g OFDM Mode
-
15
-
dBm