User's Manual
Table Of Contents
- 1.1.Product Introduction
- 1.2.Product Features
- 1.3.Technical Specifications
- 1.4.Pin introduction
- 1.5.Product packaging
- Figure 1 HLK-B36 package size
- 1.6.Block diagram
- 1.7.Testboard description
- 1.8. Power requirements
- 1.9.WIFI transmission power consumption
- 1.10.WIFI receiving power consumption
- 1.11.Power consumption in each working mode of WIFI
- 1.12.Output power in each mode of WIFI
- 1.13.Receiving sensitivity in each mode of WIFI
- 2.Function description
- 3.ATAT command instructions
- 3.1.Query the current module version:at+ver
- 3.2.Local port operation:at+CLport
- 3.3.Set up the serial port:at+uart
- 3.4.SET DHCP:at+dhcpc
- 3.5.Set wifi connection mode:at+netmode
- 3.6.Set TCP connection mode:at+mode
- 3.7.Set the remote IP when the module is used as a cli
- 3.8.Set the remote port when the module is used as cli
- 3.9.Set parameter submission:at+net_commit
- 3.10.System restart /exit at command mode:at+reconn
- 3.11.Set the ssid and password of the module:at+wifi_co
- 3.12.Set the socket connection protocol:at+remote pro
- 3.13.Set network connection parameters:at+net_ip
- 3.14.Query STA mode network connection status:at+wifi_C
- 3.15.Query module MAC address :at+Get_MAC
- 3.16.Set the framing length:at+uartpacklen
- 3.17.Set framing time:at+uartpacktimeout
- 3.18.Set Bluetooth name:at+ble_name
- 4.AT command control code routine
- 5.Restore factory settings method
- 6.Bluetooth data transparent transmission
- 7.Bluetooth distribution network
- 8.Electrical characteristics
- 8.1.Electrical parameters
- 9.Appendix A Document revision history
3.2. Local port operation:at+CLport.................................................................................. 15
3.3. Set up the serial port:at+uart......................................................................................... 15
3.4. Set DHCP:at+dhcpc...................................................................................................... 15
3.5. Set wifi connection mode:at+netmode................................................................... 16
3.6. Set tcp connection mode:at+mode................................................................................ 16
3.7. Set the remote IP when the module is used as a client:at+remoteip............................. 16
3.8. Set the remote port when the module is used as a client:at+remoteport....................... 17
3.9. Set parameter submission:at+net_commit.................................................................... 17
3.10. System restart/exit at command mode:at+reconn....................................................... 17
3.11. Set the ssid and password of the module:at+wifi_conf............................................... 18
3.12. Set the socket connection protocol:at+remotepro....................................................... 18
3.13. Set network connection parameters
:
at+net_ip......................................................... 18
3.14. Query STA mode network connection status
:
at+wifi_ConState.............................. 19
3.15. Query module MAC address:at+Get_MAC................................................................19
3.16. Set the framing length
:
at+uartpacklen..................................................................... 19
3.17. Set framing time
:
at+uartpacktimeout....................................................................... 20
3.18. Set Bluetooth name
:
at+ble_name.............................................................................20
4. AT command control code routine........................................................................................... 20
4.1. Query configuration information...................................................................................20
4.2. Serial port to wifi client (static ip address)....................................................................22
4.3. Serial port to wifi server (dynamic ip address)............................................................. 23
4.4. Reset.............................................................................................................................. 24
4.5. Configuration software instructions.............................................................................. 25
5. Restore factory settings method............................................................................................... 26
6. Bluetooth data transparent transmission...................................................................................26
7. Bluetooth distribution network.................................................................................................27
8. Electrical characteristics...........................................................................................................28
8.1. Electrical parameters.................................................................................................28
8.2. Current waveform...................................................................................................... 29
8.2.1. AP mode............................................................................................................. 29