User's Manual
Table Of Contents
- 1.1.Product Introduction
- 1.2.Product Features
- 1.3.Technical Specifications
- 1.4.Pin introduction
- 1.5.Product packaging
- Figure 1 HLK-B36 package size
- 1.6.Block diagram
- 1.7.Testboard description
- 1.8. Power requirements
- 1.9.WIFI transmission power consumption
- 1.10.WIFI receiving power consumption
- 1.11.Power consumption in each working mode of WIFI
- 1.12.Output power in each mode of WIFI
- 1.13.Receiving sensitivity in each mode of WIFI
- 2.Function description
- 3.ATAT command instructions
- 3.1.Query the current module version:at+ver
- 3.2.Local port operation:at+CLport
- 3.3.Set up the serial port:at+uart
- 3.4.SET DHCP:at+dhcpc
- 3.5.Set wifi connection mode:at+netmode
- 3.6.Set TCP connection mode:at+mode
- 3.7.Set the remote IP when the module is used as a cli
- 3.8.Set the remote port when the module is used as cli
- 3.9.Set parameter submission:at+net_commit
- 3.10.System restart /exit at command mode:at+reconn
- 3.11.Set the ssid and password of the module:at+wifi_co
- 3.12.Set the socket connection protocol:at+remote pro
- 3.13.Set network connection parameters：at+net_ip
- 3.14.Query STA mode network connection status：at+wifi_C
- 3.15.Query module MAC address :at+Get_MAC
- 3.16.Set the framing length：at+uartpacklen
- 3.17.Set framing time：at+uartpacktimeout
- 3.18.Set Bluetooth name：at+ble_name
- 4.AT command control code routine
- 5.Restore factory settings method
- 6.Bluetooth data transparent transmission
- 7.Bluetooth distribution network
- 8.Electrical characteristics
- 8.1.Electrical parameters
- 9.Appendix A Document revision history
第
31
页 共 34 页
Pic 20. Default mode current test
9.Appendix A Document revision history
Version
Revision scope
Date
V1.00
First edition
2020-12-8
FCC Statements
(OEM) Integrator has to assure compliance of the entire end-product incl. the integrated
RF Module. For 15 B (§15.107 and if applicable §15.109) compliance, the host manufacturer
is required to show compliance with 15 while the module is installed and operating.
Furthermore the module should be transmitting and the evaluation should confirm that
the module's intentional emissions (15C) are compliant (fundamental / out-of-band). Finally
the integrator has to apply the appropriate equipment authorization (e.g. Verification) for the