User's Manual

91
11.4 Import and Export
Not only most of the data in the instrument are needed to be
exported to computer to be processed, but also some edited date
are needed to be imported to instrument to be used quickly。
In the menu interface, press [4] or press [ENT] after
moving the cursor to “Import/Export” to enter the interface of
“Import/Export” ,as shown in picture below:
1.Export=>Port
△
△
2.Export=>UDisk
3.Import coord<=Port
4.Import coord<=UDisk
6.Import code<=UDisk
----Import/Export----
5.Import code<=Port
11.4.1 Export to PC
You can export the working file or known coordinate data
to the transport software from PC.
1) In the “Import/Export” menu, press [1] or press [ENT]
after moving the interface of “Export=>Port” to enter
the interface of “Export data”, as shown in picture
below. The default file name is the current working
file;
Export data
Baud.:
File:
Number:
115200
0
JOB1.DAT
↓
EXPORT
↑ FILE
Format:
▲
▲
Sunway
2) Pressing [↑] or [↓] can change the baudrate of the
communication. You must keep the baudrate of
instrument and it of transport software, or you will
export data unsuccessfully;