User's Manual
92
3) Press [FILE] to enter the interface of “Select
disk” .after select disk, enter the interface of “Select
file”,as shown in picture below. After selecting the file ,
press [ENT] to return to the interface of “Export data”
and refresh the “File”;
Select file
PCOOR .COR
JOB2 .DAT
JOB3 .DAT
JOB4 .DAT
5 .DAT
△
△
4) After connecting PC, press ‘ Recieve ’ on the transport
software from PC, and press [EXPORT] to start export
data with the display of “Number” refreshed. A prompt
will appears when finishing exporting;
5) Press [ESC] to return to “Import/Export” menu.
11.4.2 Export to U disk
This function can transport the work file and known
coordinate file to the inserted U disk.
1) In the “Import/Export ” menu, press [2] or press [ENT]
after moving the cursor to “Export=>UDisk” to enter
the interface of “Export data ”(you must insert the U
disk first or you will not allowed to enter the next
interface) as shown in picture below, the default file
name is the current file name;
Export data
Dest.:
File:
Number:
EXPORT
FILE
JOB2.TXT
JOB2.DAT
0
Format:
▲
Sunway
▲