User's Manual

3) Pressing [FILE] can reselect the file which will to be

exported.Here can only select the file in instrument

internal;

4) Press [IMPORT] to start to export data. In the

processing of the importing, the number is refreshing

constantly until finishing the importing;

5) Press [ESC] to return to “Import/Export” menu.

11.4.5 Import code from PC

You can import the coordinate date from PC to the working

file or known coordinate data by transport software and transport

line.

1) In the “Import/Export” menu, press [5] or press [ENT]

after moving the interface of “Import code<=Port” to

enter the interface of “Import”, as shown in picture

below. The default file name is the code file, which

can’t be changed;

Import

Baud.:

File:

Number:

115200

CODELIST.LST

↓

IMPORT

↑

2) Pressing [↑] or [↓] can change the baudrate of the

communication .You must keep the baudrate of

instrument and it of transport software, or you will

import data unsuccessfully;

3) After connecting PC, press ‘Send’ on the transport

software from PC, and press [IMPORT] to start import

data with the display of “Number” refreshed. A prompt

will appears when finishing importing;

4) Press [ESC] to return to “Import/Export” menu.