User's Manual

109
(right);
3) Each intersection has been input, pressing [ENT] will
enter the interface of the input of the next intersection.
If the input is completed, press [ESC] to enter the
interface of data list,as shown below, the left is line
type, and the right is northing coordinate data;
SAVE
ADD
DEL.
VIEW
01ST : 0.000
02PT : 2568.784
03PT : 3659.254
4) The other operations are same as them of element
method.
12.3 vertical alignment
The vertical alignment consists of a set of intersection
points, which contain pile, elevation and curve length. The curve
length of the start point and end point are must be zero. The
number of intersection is no more than 20.
Stake 0 508.306 1000.48
elevation 324.325 329.247 325.689
Length 0 84.56 52.806
1) In the road menu. Press [3] or press [ENT] after
moving the cursor to “VC list” to enter the interface of