User's Manual

112

Roadway-Center

Pile:

CALC

Offset:

VD:

T.H:

EDIT

0.000

5) Pressing [▼] can increase the pile according to the

space. Pressing [▲] can decrease pile;

6) Pressing [◄]can switch to the interface of left pile data,

and pressing [►] can switch to the interface of right

pile data;

7) Press [EDIT] to enter the interface of the edit of current

pile point, and you can edit pile, offset, elevation (HV),

etc;

8) Press [CALE] to enter the display interface of

coordinates of the current pile point;

Code:

S-O

REC.

Pt.N:

code

13.893

14.387

1.269

K+20.0

9) Press [REC.] to enter the interface of recording data,

and you can record the calculated data;

10) Press [S-O] to enter the interface of staking out, specific

operation seen the chapter 7.6;

11) Press [ESC] to return to “Roadway-XX”,and you can

stake out after calculate coordinates of the set pile.