User's Manual

1
1. Use of instrument
The total station is such an instrument that measures the
azimuth and distances to destination and can calculate the
destination point coordinates automatically. It plays an important
role in the economic construction and national defense
construction. General Survey, exploration and mining of
minerals, the construction of railways, roads, bridges, irrigation,
urban planning and construction is driven by electronic total
station measurements. In the building of national defense, such
as battlefield preparations, harbor, forts, airfields, bases and
military construction projects, and so on, must be based on a
detailed and accurate geodetic. In recent years, electronic total
station is a large precision engineering, shipbuilding and aviation
industries and other aspects of effective tools for precise
positioning and installation.
The series total station is equipped with absolute code dial
system, integrated-circuit-control-board ranging item and
microcomputer for measurements of angle and distance and for
calculation, display, depositing and etc. It can exhibit horizontal
and vertical angle, slope and horizontal distance and altitude
difference simultaneously. Furthermore, it can be set to measure
under different mode (e.g. Angle mode, Distance mode).It is
even designed for you specializing in construction projects with
non-prism ranging. The non-prism ranging can be
comprehensively used in measuring three-dimensional
coordinates, position determination, remote elevation
measurement (REM), verticality, pipeline positioning,
cross-section measurement etc. It also meets requirements for
trigonometrical control survey, topographic survey, cadastre and
real estate survey.