User's Manual

input mode. Maximum of 50 characters;

2) After inputting the notes, press [ENT] to record it and

then a prompt box “NOTE rec. OK” appears and back

to the “Hotkey ” interface;

3) The information of note is recorded to the current

measurement file;

4) You can press [ESC] to return to the “Hotkey”

interface under the “Input Note” interface.

3.5 Select data files

The instrument needs large data and creates large data when

it is operated. These data are storied in the system files as a file

form. It’s a good habit that select measurement files what you

need before working, otherwise, your measured data can’t be

saved.(see reference in “11. File management”.)