User's Manual

20
proper distance (about 200mm) away from the sighting device;
3) Obtain a sharp image of the target on the reticule with
the focusing screw. If optical parallax appears when angle of
view changed, the focus or the diopter of the eyepiece may be
unadjusted. For precision concerns, please adjust the eyepiece
focus to eliminate the optical parallax carefully.
4.7 Entering letters and numbers
This series total station has been equipped the key [Mode],
which can be convenient to switch the input mode between
letters and numbers.
● Input letters
Example 1: Take inputting code for example, which needs
to input “Co1” in the edit box
1) Press [Mode] to switch to the mode of inputting letters.
There is a symbol displayed as “A” beside battery;
Input code
Code：
A
2) Press [1], then, “S” displays in the edit box;
Input code
S
Code：
A
3) Wait 0.3 seconds, then press [1] again, “T”displays in
the edit box;
4) Wait 0.3 seconds,then press [1] again, “U”displays in
the edit box;