User's Manual

23
Input Angle->Set A
123.4556
HR：
1
*[ENT]to set A
3) After completing the input, press [ENT] to confirm the
input or press [ESC] to cancel it. If it is over “360°”, a
prompt box will appear.
4.8 Retrieve points
In the software functions of this series total station, we need
to retrieve or input the coordinate data of points in many places,
but the method is same. Take the “Project->base” for example.
Pt.1:
Project->base
MEAS
KNOWN
Pt.2:
ENT
A
● Retrieve the point of data files
1) Before retrieve the point, you must select a data file.
Specific operations see chapter “11.File manager”;
2) If you remember all points name, you can input the
name directly, then press [ENT]，and the coordinate
data displayed as follows;
Pt.N:
Code:
Coord. data
N:
E:
Z:
146.325 m
265.364 m
1.256 m
56
road
3) If just remember a part of point name, you can find the
point by “*”.For example, input “5*”, you can find