User's Manual

29
the current measured data are displayed whatever
interface;
6) Pressing [DSP] or [▲] [▼] can view the measured
data.
Save data
1) When the measurement is set as “AUTO”，it will enter
the interface of saving data automatically after
measuring success, and save the coordinate data;
2) When the measurement is set as “ENT”，it will enter
the interface of saving data by pressing [ENT] and the
saved data is coordinate data;
3) If you press [ENT] directly without distance
measurement, it will also enter the interface of saving
data and the saved data is angle data.
Other functions
The entrance of the other functions of this series total station
is in the basic measurement interface.
1) Pressing[1]: Enter the function of “User keys 1”
defined, which defaults to file manager;
2) Pressing[2]: Enter the function of “User keys 2”
defined, which defaults to exporting and importing file;
3) Pressing [3]: Enter the “Input code” function;
4) Pressing [4]: Enter the “Program” menu;
5) Pressing [5]: Enter the “Cofig” menu;
6) Pressing [6]: Enter the “Data ” menu;
7) Pressing [7]: Enter the stationing menu;
8) Pressing [8]: Enter the “Stake out” menu;
9) Pressing [9]: Enter the “Offset” menu;
10) Pressing [0]: Enter the “Electronic bubble” interface;
11) Pressing [▪]: Enter the “Hotkey” menu;
12) Pressing [★]: Enter the “Shot cut” interface;