User's Manual

43
7. Stake out
Staking out is to find the earth point for the designing point,
which also means setting out.
Backsight
Len
Distance
difference
Station
Angle difference
Setting out point
In the basic interface, press the key [8] to enter the menu of
staking out, which as shown below.
----Stake out----
1.S-O ang.&dist.
△
△
2.S-O coord.
3.S-O equidist.
4.S-O line pt.
5.S-O line
7.1 S-O ang.&dist.
This function is to stake out according to the calculation of
the inputs of horizontal distance, height difference, horizontal
distance between stakeout point and station.
1) In the menu of staking out, you can press the key [1] or
press [ENT] after selecting “S-O ang.&dist.”to enter
the interface “S-O polar-> Input”, which as shown
below;
2) Input the horizontal distance in the “HD” input box,
and then press [ENT] or [▼];