User's Manual

83
(the current file can’t be deleted),if press [ESC],then return
to file manager interface directly;
8) Pressing [INFO] can view the selected information, and
press [ENT] or [ESC] to return to the file manager
interface;
9) Press [FORMAT] with a prompt “Erase all data, continue?”
appearing (you must be very careful),if you press
[ENT],then the flash disk will be erased and the other data
will be cleared except system parameters;
10) Press [ESC] or [ENT] to return to menu interface.
11.2 Setting
For the different measurement environment and work , you
can set the instrument. In the interface of the basic interface,
press [2] or press [ENT] after moving the cursor to “Setting” to
enter the interface of instrument setting menu, as shown in
picture below:
----Setting----
1.Angle
3.Coordinate
2.Distance
4.Unit
5.Communication
----Setting----
6.Others
7.Factory reset
8.Upgrade
11.2.1 Angle Setting
1) In the instrument menu, press [1] or press [ENT]
after moving the cursor to the “Angle” to enter the
interface of “Angle setting”, as shown in picture
below: