User's Manual

87
selected;
3) Cable: there are “2400”, “4800”, “9600”, “19200”,
“38400”, “57600”, “115200”.
11.2.6 Other settings
1) In the settings menu, press [6] or press [ENT] after
moving the cursor to “Others” to enter the interface of
“Others”, as shown in picture below:
Others
Poweroff:
S-O Pt.N:
1000
▲
▲
1
Pt.N Check:
Never
▲
▲
ON
2) S-O Pt.N: used for “S-O coord.”. The value set will be
added to the point name when saving the measured
point ,and the range is 0~9999;
3) Power off : there are “Never”, “5min”, “10min”,
“20min”, “30min” to select;
4) Pt.N Check: for Checking homonymous points. There
are “ON” or “OFF”.
11.2.7 Factory reset
1) In the setting menu, press [7] or press [ENT] after
moving the cursor to “Factory reset” , then a prompt
box appears as shown in picture below:
----Setting----
4. Unit
6. Others
5. Communication
7. Factory reset
8. Upgrade
3. Coordinate
ENT
ESC
Reset to
factory setting ?
Info
D
2) If press [ENT], restore the instrument to factory setting