User's Manual

15
Remove the SD card, open the card buckle along the direction of OPEN , remove the SD
card,lock the card slot along the LOCK direction .
▲Note: the MicroSD cards (also named TF card) are small volume external flash memory
storage expansion CARDS, usually used in mobile phone, PDA, users should distinguish it
between the common one. The volume of ordinary SD card are larger than the MicroSD card, not
suitable for Qmini M series industrial GIS data collector use. Qmini M series industrial GIS data
collector can support 32 GB MicroSD card at most for present.
Power supply system
◊ The battery installation and removal
Install the battery, the battery with a metal connector on one end contacts Qmini M series data
collector battery tank copper , pressed the battery in according to the left lower red arrows
figure direction.
Picture3-6 picture3-7
Take out the battery, pull out the battery according to the upper right sign of the red direction
arrow