User's Manual

16
◊ Qmini M series industrial GIS data collector battery, charger model
Table 3-1 Qmini M series industrial GIS data collector battery, charger model
name model
3100 mAh lithium batteries
BL-3100A
Lithium battery charger
CL-3100A
◊charge
Charge should be used when the instrument with standard special charger or seat charger in
certain temperature range charging, and charging time should achieve a certain requirements.
The concrete use method and requirements: charge should be used when the industrial GIS data
collector with standard filling lines, in 10 ℃ ~ 40 ℃ temperature range charge. Used for the first
time in general, there is still a battery power, should first will use up the inside of the electricity
charge again, the first three times must charge 12 hours, after that charging 4 hours. If the
battery are not often in use, it must be charged once a month.
∆Warning: 1The battery and charger manufacturer configuration are only permitted, do not put it
into the fire or metal electrodes with short circuit.
2 If you find the battery has fever, deformation, discharge, smell or other abnormal phenomenon
when the battery is in use 、incharge or in storage, please replace new battery.