User's Manual

1
Preface
Manual use
Welcome to use Qmini M series industrial GIS data collector instructions。 This manual
applies to Qmini M1 / Qmini M3 / Qmini MR/Qmini MT/Qmini MP series, this manual
introduces how to install, set up and use industry-specific GIS data collector.
Manual introduction
Qmini M series industrial GIS data collector is a new GPS/GIS data collector, even if you
use other types of industrial GIS data collector, please also carefully reading before use
this specification.
Experience demanded
In order to you can better use Qmini M series industrial GIS data collector, HI-TARGET
suggest you have a certain measure knowledge, and carefully read the instruction. If you
have any questions, please refer to the official website of the HI-TARGET: <
http://www.hi-target.com/ >.
Safety technical note
Note: pay attention to tip the content general is operation special place, need to
bring your special attention, please read
Warning:the warning content is general very important tip, if not in warning operate
within the tip, you will cause the damage of the instrument, the loss of the data,
and the collapse of the system, even endanger the security of person.