User's Manual

2
Responsibility absolution
Before you use the product,you should read the introduction carefully. Guangzhou HI-TARGET
surveying and mapping instruments Co., LTD. We will not take the responsibility if you not
operate within the product instruction。
Guangzhou HI-TARGETsurveying and mapping instruments Co., LTD. Is committed to
continuously improve product function and performance, improve the service quality, and keep
the right to change the content of the instruction without notice in advance.
We have to print described in the content and the consistency of the hardware and software to
do an inspection, but don't rule out the possibility of bias, the picture in the instruction for use for
reference only, if you have a product with discrepancies, please use the product kind prevail.
Technology and service
HI-TARGET have set up the“technology and service”section, if you have problems you
settle them through the "service guide" telephone contact regional technology center,
headquarters division or through the "experts on the judgment seat," "technology BBS"
message, we will answer your questions in time.
Related information
You can find the instructions through the following methods:
1,、purchased products from the HI-TARGET will with a CD, open the CD and you can
find the instruction;
2、land the official website of the HI_TARGET, through "downloaded zone"-" product
specifications "and" GIS product "and you can it.
Your suggestion
If you have any Suggestions and opinions about the introduction, please visit the official
website of the HI-TARGET, and leave massage in "technical service" and "advice and
complaint" edition , your feedback on the quality of the information we will be greatly
improved.