User's Manual

Use and the matters needing attention

Although Qmini series industrial GIS data collector use the corrosion resistance and

impact resistance materials, but the instrument still need our careful use and maintenance,

and keep it in dry environment as far as possible. In order to improve the stability of the

data collector industrial GIS and use cycle, please avoid industrial GIS data collector

exposed to extreme environment , such as: damp, high temperature, low temperature,

corrosive gas or liquid, etc.

∆ Warning: industrial GIS data terminal in use and preservation must be stipulated in

the temperature range. Detailed requirements, please refer to chapter 4: technical

parameters.

To ensure continuous observation of the satellite tracking and satellite signal quality,

the stations should be set as far as possible over the open place, barriers are not

permission in more than 15 degree place; To reduce the interference of electromagnetic

wave to GNSS satellite signal ,within 200 m strong electromagnetic interference is not

permitted, such as TV tower, microwave station, high voltage transmission line; To avoid

or reduce the happening of the multipath effect, stations should be far away from to the

electromagnetic wave signal reflection strong terrain, features, such as high building,

sliced waters, etc.

FCC ID: O39ZHDQmini

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.