HiTi P510S/P510Si User’s Manual EN ENGLISH 1
General Information = Copyrights = All rights reserved. The information contained in this user’s manual is subject to change without notice. HiTi Digital Inc. makes no warranty with regard to the material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. HiTi Digital Inc. will not liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of the material.
General Information = Trademarks = Microsoft, MS-DOS, and Windows are registered trademarks of Microsoft Corporation. Adobe and Acrobat are registered trademarks of Adobe Systems Incorporated. Mac, Macintosh, and Mac OS are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Pentium is a U.S. trademark of Intel Corporation. All other trademarks or registered trademarks are properties of their respective companies.
Table of Content 1. Checking Package Contents 2. Getting the Latest Update 3. Introduction of P510S Series 4. z Top z Front z Rear z Sides Making P510S Ready to Print z Installing the ribbon cartridge z Installing the paper box a. Assembling the paper roll and flange b. Putting the paper roll into paper box c. Inserting the paper box to the printer z Powering up the printer 5. Introduction of Standalone Function 6. Printing Out Photo(s) By Standalone 7.
Checking Package Contents HiTi Photo Printer P510S/P510Si Paper Roll Flange x2 Paper Roll Spacer x2 Paper Box P510S/P510Si Application Suite USB Cable Power Cord Note 1. If something missed from the package, please contact your local dealer or HiTi service center nearest to you. 2. Paper roll spacer is NECESSARY only for 5x7 size paper roll installation. 3. Consumables are EXCLUDED.
Getting the Latest Update HiTi Digital Inc. website provides the latest driver, application, user’s manual, printer firmware, and so on for users to download. Please visit our website at www.hiti.com for more information. Any questions toward HiTi product(s), please contact your local service center for detail.
Introduction of P510S z Top 3.6-inch LCD [Tilt-able] Output Tray = PRINT = OK/Set/ = Edit Save/Execute = Directional button = Exit/Cancel z Front For use of CF / Micro Drive memory card For use of SD / MMC / MS / MS Pro memory card For the use of USB Pen Drive or USB HDD (FAT Formats only).
Introduction of P510S z Rear Vents USB Device Socket Video-Out Socket z Power Cord Socket Power Switch Sides Vents 8
Making P510S Ready to Print z Installing the ribbon cartridge z Installing the paper box Paper Core a. Assembling the paper roll and flange ❶ ❸ ❷ Paper roll ❶ = Flange (Two colors) ❷ = Spacer (Necessary only on 5x7 size paper roll installation) ❸ = Paper roll Upon assembly, please install the spacers in the paper flange (green) and paper flange (orange) first when using 5x7 size paper roll. The two spacers are identical. Match the notch of paper flange and the notch of paper core.
Making P510S Ready to Print (After assembly) b. Putting the paper roll into paper box ❶ Flip the paper box as shown, and then press the box button to open the box.
Making P510S Ready to Print ❷ Place the paper roll into the box as shown, make sure the color of paper roll flange is in consistency with same color of flange holder inside the box. ❸ Remove the seal from the paper after setting the paper roll, and then pull out the paper so that it comes out across the box edge.
Making P510S Ready to Print ❺ Rotate the knob counterclockwise to draw back protruding paper until it’s straight and aligns with paper box bottom edge as shown. ❻ Load the paper box into the printer and then close the front door to finalize the installation. z Powering up the printer After the printer is turned on, your P510S is ready for use.
Introduction of Standalone Function ❶ ❷ ❸ ❹ ❺ Print Mode Event Photo Passport/ID Photo Personalized Photo Quick Print Multiple Print ❶ ❷ ❸ ❹ ❻ Settings = = = = Slot of SD / MMC / MS / MS Pro memory cards Slot of CF I / CF II / IBM Micro drive memory cards USB host device (USB pen drive) Border Print* * When the icon shows up, it refers to the function of border print activated. ❺ = eFrame** ** When the icon shows up, it refers to the function of eFrame activated.
Standalone Function Settings Î Printer Settings z Print Mode (Event Photo, Personalized Photo, Passport/ID Photo) z ColorWizard (HiTi Classic Color) z Color Filter z LCD Adjustment z Languages z Video-Out (NTSC, PAL, OFF) Î Advanced Settings z Wireless-Camera z Wireless-Mobile Phone z LinkPrint™ z Border Print z Date Print z Print Size Î Printer Maintenance z Printer Cleaning z Paper Cutting z Offset Alignment z Jam Recovery z Print Count Î eFrame z Browse z Load z Delete Selected z Delete All Î About 14
Printing Out Photo(s) By Standalone z Correctly inserting the memory card Note A USB card reader or adapter is needed when the Memory Stick Duo is used.
Printing Out Photo(s) By Standalone z Photo finishing by Quick Print Quick Print provides a way for users to print out a photo with all speed.
Printing Out Photo(s) By Standalone z Photo finishing by Multiple Print: Selected Print ❶ Multiple Print provides varied printing categories for users in photo finishing: 1) Selected Print 2) Batch Print 3) Print All 4) Index Print Selected Print is designed for users to print multiple photos at one time. Users is allowed to set copies and do photo enhancement for each image. ❷ Select Selected Print and press [ [ [ [ ] to continue ] to select a photo ] to set the copies, if need.
Printing Out Photo(s) By Standalone z Photo finishing by Multiple Print: Batch Print Batch Print is designed for users to print as many as digital photos by few clicks. By setting Start and End, images in between will be printed. Please note that function of Edit [ ] CANNOT be used on Batch Print. ❶ [ [ ] to select the image ] to set or cancel the Start/End image * If you’ve set the Start and would like to change, please target that photo and then press [ ] to cancel previous setting.
Photo Finishing With eFrame On z Photo finishing with eFrame on by the print mode: Event Photo Two of three print modes are capable of eFrame application, Event Photo & Personalized Photo ❶ ] is the hot key to quickly switch the print mode [ among Event Photo, Personalized Photo, and Passport/ID Photo. Select an eFrame and press [ ❷ ] to activate eFrame presented here all hinges on the print size set then. For example, if the print size is set at 4x6, only 4x6 compatible eFrame will be listed herein.
Photo Finishing With eFrame On z Photo finishing with eFrame on by the print mode: Personalized Photo Personalized Photo provides 2 options for users to apply: Collage Print & eFrame Print ❶ In eFrame Print, users can print one or multiple images with designated eFrame on. However, the designated eFrame will be deactivated after printing job is completed. Go to eFrame Print ❷ Select an eFrame for further use ❸ Select one or multiple images for eFrame Print.
Photo Finishing With eFrame On Photos are being printed with eFrame on ❻ 21
Printing Out Passport/ID Photo(s) By Standalone Before making ID photos, print mode must be set at Passport/ID Photo. By the hot key [ can be quickly switched to Passport/ID Photo. ], print mode Make sure the print mode is set at Passport/ID Photo, and then press [ ] to next ❶ [ [ ] to target an ID format ] to select [ [ ] to select the column ] to select the photo ❷ ❸ [ [ [ ❸ ] to target the image ] to select the image ] to edit image Edit your ID photo, if need.
Printing Out Passport/ID Photo(s) By Standalone When all columns are fully loaded, the printer will remind you to press [ ] for printing. ❺ Set the copies of print and then press [ printing.
How to Manage My Photo eFrame or ID Format P510 photo eFrame and ID format are saved in the internal flash of the printer. Users can freely add new or delete undesired files from the printer. Before managing them, there’s need to check the status of print mode in advance. In case the print mode is set at Event Photo or Personalized Photo, only photo eFrame can you manage. If you’d like to manage your Passport/ID formats saved in the printer, you need to set the print mode at Passport/ID Photo.
How to Use ID Creator to Make New ID Formats Before using ID Creator, please make sure you’ve installed this program onto the computer. You can find the software source on the CD of printer driver. ❶ Choose a item to apply ❷ Key in the size of ID format you’d like to have.
How to Use ID Creator to Make New ID Formats (Continue from last page) ID Creator will automatically produce the format right after you give the size. You can decide whether to set Interval between ID formats or White border for the ID prints.
How to Use ID Creator to Make New ID Formats = With Interval but no White border = Interval = 3mm Interval = 3mm 27
How to Use ID Creator to Make New ID Formats = No Interval but with White border = White border=3mm White border = 3mm 28
How to Use ID Creator to Make New ID Formats = With Interval and White border = 29
How to Use ID Creator to Make New ID Formats ❸ Set alignment line [or biometric line], if need. ID Creator allows 5 alignment lines each for horizontal and vertical orientation. You can key in or directly draw out the alignment line from the top or side meter.
How to Edit My Photo(s) – Photo Enhancement P510 allows users to Edit their digital photos with no inconvenience.
What Is Color Filter & How It Works Color Filter is similar to the adjustor of P510 series driver. All adjustment made will be applied to all finished photos. Before using Color Filter, please make sure you’ve inserted a memory card with at least one digital photo. The referencing photo of Color Filter derives from the memory card.
PC-Link Printing Before working on photo finishing, please make sure you have followed the User’s Manual booklet supplied for printer installation. Please pay particular attention to the safety instructions. The printer driver enables you to do photo printing through a computer. Please see below for the system requirement of a PC. System requirement z Intel Pentium or compatible PC z Windows 2000/XP/Vista (32 bit), Mac OS X 10.2 to 10.
PC-Link Printing Installing the printer driver 1) Make sure the printer is turned off 2) Insert the CD into CD/DVD ROM, and then the computer will automatically start the installation. If the installation does not start automatically, please run the autorun.exe file in the driver CD. Press [Start] for driver installation You might be informed the security and asked for installation. select “Install this driver anyway” to continue.
Photo Finishing By PC-Link Printing Software: Windows Photo Gallery Step 1: Select an image and use Windows Photo Gallery to browse Step 2: Click the icon [ ] and choose “Print” 35
Photo Finishing By PC-Link Printing Step 3: Print pictures Make sure P510 is truly selected Click “Print” to photo finishing… 36
Specification Please note that specification of P510 Series is subject to change without notice. Item Description Resolution 300 x 300 dpi Max Prints Size 6x9 borderless Printing Speed (4x6) Around 12 sec Capacity 4x6: 330 images 5x7: 190 images 6x8 / 6x9: 150 images Printing Category Display Memory Card* Wireless Capability Driver 4x6 / 5x7 / 6x8 / 6x9 / 6x9-2UP 3.6-inch TFT LCD (Tilt-able) CF & Micro Drive / SD (SDHC) / MMC / MS / MS Pro / USB Pen Drive 802.
How to Do Direct Wireless Printing By P510Si Scenario 1 Using Canon DSLR to take pictures and printing photos by P510Si (Example on Canon 30D/20D) Before the setting, you need to connect Canon wireless file transmitter to your camera in advance. For detailed instruction of transmitter setting, there’s need to read the user’s manual of Canon wireless file transmitter WFT-E1A. P510Si, we provide a brief introduction of how to set up your Canon transmitter.
Scenario 2 Using Nikon DSLR to take pictures and printing photos by P510Si (Example on Nikon D200) Before the setting, you need to connect Nikon wireless transmitter to your camera in advance. For detailed instruction of transmitter setting, there’s need to read the user’s manual of Nikon wireless transmitter WT-3. On P510Si, we provide a brief introduction of how to set up your Canon transmitter. 1) 2) On P510Si, go to Settings \ Advanced Setting Select Wireless for Camera and enable the function.
If setup is correct, you will see signal shown on camera LCD FTP setup 40
