User's Manual

Microsoft Windows XP Operating System
1. Click "Start" "Control Panel" then click the "Appearance and Themes" Icon.
2. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
3. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
4. Click "Update Driver..." and select "Install from a list or..." then click "Next"
button.
5. Select "Don't search, I will..." then click "Next" and then click "Have disk".
6. Click the "Browse" button then choose A: and choose 17" LCD and click the
"Next" button.
7. If you can see following "Message" window.
This monitor driver is not certified MS logo, and this installation don't
damage your system.
Then, click the "Continue Anyway" button followed by the "OK" button.
8. Click the "Close" button then click "OK" button until the installation is complete.
9. Monitor driver installation is complete.
Microsoft Windows NT Operating System
1. Click Start, Settings, Control Panel, and then double-click Display icon.
2. In Display Registration Information window, click Settings Tab and then click All
Display Modes.
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical
frequency) and then click OK.
4. Click Apply button if you see the screen working normally after clicking test. If
the screen is not normal, change to a different mode (lower mode of resolution,
colors or frequency).
Note: If there is no Mode at All Display Modes, select the level of
resolution and vertical frequency by referring to the Preset Display Modes
in the user guide.
INSTALLATION
- 10 -