User's Manual

V1(Video) / V2(S-Video)
Icon Menu Function Descriptions
USER CONTROLS - MENU OPERATIONS
- 15 -
Contrast Use to adjust the light output of the darkest areas of the picture
to black
Brightness
Use to adjust the light output of the brightest areas of the
picture to white.
Sharpness
Use to adjust the desired sharpening enhancement to the
picture.
Color Adds coloring to the black and white picture content (of a color
signal), and is usually set for pleasing facial skin tones.
Tint (NTSC Only)
Used to adjust all the colors on the screen, but is most noticeable
to the eye in reds and yellows, and is also usually set for pleasing
facial skin tones.
Motion Mode
Changes the scanning method of the LCD monitor.
There are three methods which can be controlled.(Motion, /Still
and /Progressive)
Still and Progressive modes are both progressive scans but
Progressive is better than Still for moving images and Still is
better than Progressive for still images.
Motion uses the interlace scan.
Under Scan
Adjusts the image size.
Reduce unwanted vertical lines that flow horizontally.
In some cases, vertical lines flowing to the right or left appear
depending on the video source.
When flowing vertical lines appear, it is convenient to reduce
them by adjusting the DVCO.
DVCO
Filter
Adjusts Filter "ON" to reduce the video noise.
AFC
AFC (auto frequency control) is used to adjust for the skew
distortion of a video signal from a recorder (or other equipment).
The options are NORMAL, SLOW and FAST.
Recall
Resets the monitor to the original factory setting.
OSD
H Position
Adjusts the horizontal position of the OSD window.
Adjusts the vertical position of the OSD window.
Changes the opaqueness of the background of the OSD.
V Position
Blending
Language
or
Volume
Controls the output of the internal speakers.
Mute
Turns the volume of the internal speakers to zero.