User Manual

VIDEO
Volume
Contrast
Brightness
Sharpness
Color
Tint
Language
Motion Mode
Under Scan
Input
Filter
AFC
DVCO
Recall
:10
:41
:23
:5
:30
:25
: English
: Motion
: OFF
: CVBS
: OFF
: Fast
:25
:No
Language:
Input
Recall
English
Deutsch
Fran ais
Italiano
Espa ol
Polski
sets the OSD language of the menu to English.
sets the OSD language of the menu to German.
sets the OSD language of the menu to French.
sets the OSD language of the menu to Italian.
sets the OSD language of the menu to Spanish.
sets the OSD language of the menu to Polish.
selects between the PC, composite(BNC)or Y/C (4 pin S-video) to be
dispalyed.
sets the monitor to the original factory setting.
Pushing the button will bring up the Menu shown above.
Select the item which you want to adjust using the , buttons
As shown, the Brightness may be adjusted with the or buttons.
To exit the menu, push the button.
(This process store the new settings which you have selected.)
controls the output of the internal speakers.
MENU
MENU
Volume
Contrast
Brightness
is used to set the light output of the areas of the picture to
.
is used to set the light output of the areas of the picture to
.
Use the to make the details in the dark areas of the picture to
be just visible, and to "brighten" the picture without causing noses
and foreheads to turn white.
brightest
white
darkest
black
: Brightness
Contrast
Tip
-18-