INSTRUCTION MANUAL 15"/17"/20.1" COLOR TFT-LCD MONITOR Please read this manual thoroughly before use, and keep it handy for future reference.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION: CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FCC COMPLIANCE STATEMENT INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS.
IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS -- All the safety and operating instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS -- The safety and operating instructions should be retained for future reference. 3. CLEANING -- Unplug video monitor or equipment from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
TABLE OF CONTENTS Features 5 Installation 6 Connections 13 Operating Instructions - Controls 14 Backside Connections 15 User Controls - Menu Operations 16 Specifications 19 OSD Language Chart 25 Bracket Features 26 Stand Features 27 FEATURES - Go-Anywhere Professional Color LCD Monitor - High Bright, High Quality Picture - NTSC and PAL in Composite and Y/C - Thin and Lightweight, Rugged Metal Cabinets - Many Mounting and Installation Options - Low-Power Consumption-12 volts DC Operation
INSTALLATION LCD monitors may be mounted in any position or orientation. Considerations for mounting include regard for how the monitor is going to be used, routing of connecting cords, and locations away from heat sources (including direct sunshine on the black case). Mounting hard points include 10-32 inserts. Cooling is not required, but some airflow around the case will allow the small amount of heat to be dissipated.
Click Add New Hardware. Click Next.
Click Next. Click Next after selecting No, the device isn't in the list.
Click Next after selecting No, I want to select the hardware from a list. Click Next after selecting Monitors.
Click Have Disk.... Insert the supplied 3.5" floppy disk in A Drive. Select OK.
Select Next after selecting the same model which you purchased. Click Finish.
Installaion Guide for Video Driver Microsoft Windows 2000 Operating System 1. Click "Start" , "Setting" , "Control Panel". 2. Double click the "Display" Icon. 3. Choose the "Settings" tab and then click "Advanced..". 4. Choose "Monitor". Case1: If the "Properties" button is inactive, it means your monitor is properly configured. Please stop installation Case2: If the "Properties" button is active, click the "Properties" button then follow next steps continually 5.
CONNECTIONS To make a normal connection to the monitor, bring a cord from a camera or other video source to one of the BNC jacks or from a PC to the PC jack on the back of the monitor. Either the left or right BNC jack can be used for input. The other jack may be optionally connected to another user of the same signal. Auto Termination The input circuit of the monitor normally terminates the incoming cable in 75 , but these BNCs jack are auto-terminating.
OPERATING INSTRUCTIONS - Controls 7 1 2 3 4 5 6 Control Buttons, Video Monitor Front. Use a cloth dampened with a mild cleaner to clean the screen. 1. Power On/Off When power is applied, the monitor will come on. This button then turns the monitor on and off. 2. Menu On/Off This button is used to bring up or disappear the controls menu. 3. Select Down This button is used to move down the menu list. 4. Select Up This button is used to move up through the menu list. 5.
BACKSIDE CONNECTIONS 4 5 2 1 - DC12V + AUDIO VIDEO S-VIDEO PC 3 Typical Color LCD Video Monitor Back 1. Input Connector Wall Recessed wiring location for all cables. Place the plug from the supplied tabletop power supply into the DC 12V connector. Input at the monitor is 12 volts DC from the TT universal AC supply (100-240 VAC, see specifications table for AC/DC details). 2. Input Video BNC (and Y/C)and P.C Connectors Attach the video cord from a camera, VCR, or other source here.
USER CONTROLS - Menu Operations PC Brightness Contrast Clock Phase Auto H Position V Position RGB Offset Volume Language Input Recall : 25 : 41 : 125 : 16 : Stop :0 :0 :0 : 10 : English : PC : No Pushing the MENU button will bring up the Menu shown above. Select the item which you want to adjust using the , buttons As shown, the Brightness may be adjusted with the or buttons. To exit the menu, push the MENU button. (This process store the new settings which you have selected.
Language: English sets the OSD language of the menu to English. Deutsch sets the OSD language of the menu to German. Fran ais sets the OSD language of the menu to French. Italiano sets the OSD language of the menu to Italian. Espa ol sets the OSD language of the menu to Spanish. Polski sets the OSD language of the menu to Polish. Input selects between the PC, composite(BNC)or Y/C (4 pin S-video) to be dispalyed. Recall sets the monitor to the original factory setting.
Sharpness sets the desired sharpening enhancement to the picture. Color adds coloring to the block and white picture content (of a color signal), and is usually set for pleasing faces. Tint adjusts all the colors on the screen, but is most noticeable to the eye in reds and yellows, and is also usually set for pleasing face tones. (Appears in NTSC mode only). Language: English sets the OSD language of the menu to English. Deutsch sets the OSD language of the menu to German.
SPECIFICATIONS-15inch LCD LCD panel Active display area (Diagonal) Pixel format Pixel pitch Color depths Contrast ratio Brightness Viewing angles (L/R/U/D) Light source / Lifetime Response time(tr/td) 15.0 inches TFT LCD Panel 15.0 inches 1024(H) x 768(V), RGB vertical stripe 0.297mm x 0.
User controls OSD Language Power requirement Power consumption DC power connector AC power connector Dimensions Weight Operating temperature Storage temperature Case color Case material Accessories Bright, Contrast, Tint, Color, Sharpness, etc English / French / German / Italian / Spanish / Polish 12VDC, 3.0A 30 Watts Barrel, 5.5/2.5mm(+ Center) IEC-320 Male, 100 - 240VAC 349.2mm(W) x 285.7mm(H) x 44.5mm(D) 2.
SPECIFICATIONS-17inch LCD LCD panel Active display area (Diagonal) Pixel format Pixel pitch Color depths Contrast ratio Brightness Viewing angles (L/R/U/D) Light source / Lifetime Response time(tr/td) 17.0 inches TFT LCD Panel 17.0 inches 1280(H) x 1024(V), RGB vertical stripe 0.264mm x 0.264mm 8 Bit / 16.
User controls OSD Language Power requirement Power consumption DC power connector AC power connector Dimensions Weight Operating temperature Storage temperature Case color Case material Accessories Bright, Contrast, Tint, Color, Sharpness, etc English / French / German / Italian / Spanish / Polish 12VDC 3.25A 41 Watts Barrel, 5.5/2.5mm(+ Center) IEC-320 Male, 100 - 240VAC 398mm(W) x 333mm(H) x 56mm(D) 3.
SPECIFICATIONS-20.1inch LCD LCD panel Active display area (Diagonal) Pixel format Pixel pitch Color depths Contrast ratio Brightness Viewing angles (L/R/U/D) Light source / Lifetime Response time(tr/td) 20.1 inches TFT LCD Panel 20.1 inches 640(H) x 480(V), RGB vertical stripe 0.6375mm x 0.6375mm 8 Bit / 16.
User controls OSD Language Power requirement Power consumption DC power connector AC power connector Dimensions(W x H x D) Weight Operating temperature Storage temperature Case color Case material Accessories Bright, Contrast, Tint, Color, Sharpness, etc English / French / German / Italian / Spanish / Polish 12VDC, 4.25A 60 Watts Barrel, 5.5/2.
OSD LANGUAGE CHART English German French Italian Spanish Polish No Signal No Signal No Signal No Signal No Signal No Signal NTSC NTSC NTSC NTSC NTSC NTSC PAL PAL PAL PAL PAL PAL Volume Lautstarke Volume Volume Volumen Glosnosc Contrast Kontrast Contraste Contrasto Contraste Kontrast Brightness Helligkeit Luminosite Luminosita Brillante Jansnosc Sharpness Scharfe Nettete Definizione Nitidez Ostrosc Kolor Color Frabkontrast Couleur Colore Color Tint Tonung
BRACKET FEATURES-Optional - Light duty wall & ceiling mount - Adjustable swivel head - Die cast and aluminum - Cable feed through hole conceals wiring - PT 1 threaded pipe - Maximum load 20 lb ( 9.0kg ) The Bracket is light duty wall & ceiling mount designed for use with LCD monitor. This mount is for use in wall & ceiling mounting applications and is capable of supporting loads up to 20 lb ( 9.0kg ).
STAND FEATURES-15",17" Optional 1-1. FH4X6 size SCREW 1-2. M4 size SCREW 2. METAL PLATE 3. HINGE 4. HINGE_COVER 5. STAND 4 1-1 1-2 2 3 SECTION 5 MONITOR STAND In order to install the desk-top stand at LCD monitor properly, First, fix the metal plate provided to LCD monitor with 4 screws of only FH4X6 size only and the desk-top stand to the metal plate with 4 screw of M4 size. Lastly, put the hinge cover on the hole located on the rear side of LCD monitor . Note) 1.
COLOR TFT-LCD MONITOR 15.0"/17.0"/20.
