User's Manual

- 16 -
USER CONTROLS - Menu Operations
PC
Brightness
Contrast
Clock
Phase
Auto
H Position
V Position
RGB Offset
Volume
Language
Input
Recall
: 25
: 41
: 125
: 16
: Stop
: 0
: 0
: 0
: 10
: English
: PC
: No
Brightness is used to set the light output of the darkest areas of the picture to
black.
Contrast is used to set the light output of the brightest areas of the picture to
white.
Clock is used to adjust best picture quality. It adjusts the numbers of the pixel
clock across one line time. Therefore it can affect the picture poisition and size.
Phase is used to adjust best picture quality. It adjusts the sampling phase across
one pixel time. When the phase is not adjusted properly, the picture quality is not
good. Therefore this value should be carefully adjusted.
Auto
Select "Yes" using or buttons to adjust the best picture quality automatically.
Execute repeatedly if the picture quality is not good.
H Position is used to adjust the horizontal position of the image on the screen.
V Position is used to adjust the vertical position of the image on the screen.
RGB Offset
RGB Offset is used to adjust the video input range. When the bright areas of the
picture is too high (low), increase (decrease) the RGB Offset value.
Image Effect is used to soften or sharpen the image. (17" Only)
Volume controls the output of the internal speakers.
Pushing the MENU button will bring up the Menu shown above.
Select the item which you want to adjust using the , buttons
As shown, the Brightness may be adjusted with the or buttons.
To exit the menu, push the MENU button.
(This process store the new settings which you have selected.)