User's Manual

VIDEO
Volume
Contrast
Brightness
Sharpness
Color
Tint
Language
Motion Mode
Under Scan
Input
Filter
DVCO
Recall
: 10
: 41
: 23
: 5
: 30
: 25
: English
: Motion
: OFF
: CVBS
: OFF
: 25
: No
Language: English sets the OSD language of the menu to English.
Deutsch sets the OSD language of the menu to German.
Fran ais sets the OSD language of the menu to French.
Italiano sets the OSD language of the menu to Italian.
Espa ol sets the OSD language of the menu to Spanish.
Polski sets the OSD language of the menu to Polish.
Input selects between the PC, composite(BNC)or Y/C (4 pin S-video) to be
dispalyed.
Recall sets the monitor to the original factory setting.
Pushing the MENU button will bring up the Menu shown above.
Select the item which you want to adjust using the , buttons
As shown, the Brightness may be adjusted with the or buttons.
To exit the menu, push the MENU button.
(This process store the new settings which you have selected.)
Volume controls the output of the internal speakers.
Contrast is used to set the light output of the brightest areas of the picture to
white.
Brightness is used to set the light output of the darkest areas of the picture to
black.
Tip: Use the Brightness to make the details in the dark areas of the picture to
be just visible, and Contrast to "brighten" the picture without causing noses
and foreheads to turn white.
- 17 -