User manual

17 18
The LED light will be lit up during battery charging.•
Be careful not to force the plug into the socket.•
Make sure the battery is correctly inserted before connecting the •
charger.
The mains socket must be near to the phone and easily accessible (avoid •
electric extension cables).
When using your telephone for the first time, charge the battery fully •
(approximately 4 hours).
You are advised to fully charge the battery (
). Charging status is
indicated by the depth of water on the lock screen. The depth increases
as the phone is charged.
To reduce power consumption and energy waste, when battery
is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when
not in use; reduce the backlight time, etc.
Power on your phone1.2.2
Hold down the Power key until the phone powers on, type in your PIN
code if necessary and then confirm. The Home screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact
your network operator. Do not leave your PIN code with your telephone.
Store this information in a safe place when not in use.
Set up your phone for the first time
The first time you power on the phone, you're are prompted to set
up your phone in multiple ways: language, input method, mobile data
connection, account setup and synchronization, system update, etc. You
are required to sign into your Google account to synchronize email,
contacts, calendar and other Google applications
(1)
.
Enter your user name and password, then touch • Sign in. If you forget
your password, you can go to http://www.google.com/ to retrieve it. If
you don’t own a Google Account, you are prompted to create one by
touching Create.
Read the setup information on the screen.•
Mark/Unmark the check box to choose whether you want to take •
advantage of Google's location service, then touch Next.
Mark/Unmark the check box to choose whether you want to back up •
data with your Google account, then touch Next.
Touch • Finish setup.
This initial set up can be skipped and enabled via Settings\
Accounts & sync.
In power on screen without SIM card inserted, you can also connect to
a Wi-Fi network (refer to section 6.1.2 Wi-Fi) to sign into your Google
account and to use some features.
The first time you insert a new SIM card, you are given the option to
change the default SIM settings (refer to section 11.1 SIM management).
Power off your phone1.2.3
Hold down the Power key until the phone options appear, select Power
off.
(1)
Application availability depends on country and operator.