User's Manual

Table Of Contents

HBR-DS-18002: Hiberband modem product datasheet

Same world, different angle.

Page 7

2.8 Mechanical dimensions

The mechanical drawing of the Hiberband modem is shown in figure 4.

Figure 4: Mechanical drawing Hiberband modem

The pin numbers have been omitted from figure 4. Please refer to section for pin assignment information.

The Hiberband modem has two antenna connectors: one MMCX-female for the HiberBand antenna and one U.FL-

male for the GPS antenna.

Parameter Description Typical Tolerance

A Module length 47.2 mm +0.2/-0.2 mm

B Module width 35.6 mm +0.2/-0.2 mm

C Module height (excl. antenna connectors) 4.2 mm +0.3/-0.1 mm

H HiberBand antennta connector height 6.2 mm +0.3/-0.1 mm

M1 Pin-to-pin spacing 2.54 mm +0.02/-0.02 mm

M2 Edge to pin 16/28 spacing 5.08 mm +0.02/-0.02 mm

M3 Edge to pin 17/27 spacing 2.54 mm +0.02/-0.02 mm

Weight Module weight < 30g

Table 11:

HiberBand

GPS