User's Manual

HBR-DS-19001: Hiberband modem product datasheet
Copyright © 2019 - Hiber | www.hiber.global
Same world, different angle.
Page 7
2.9 Mechanical dimensions
The mechanical drawing of the Hiberband modem is shown in figure 4.
Figure 4: Mechanical drawing Hiberband modem
The pin numbers have been omitted from figure 4. Please refer to section for pin assignment information.
The Hiberband modem an antenna pad for connection of an external antenna.
3 Typical application ciruit
A typical interface between the application host processor, generally a microcontroller, and the Hiberband
modem is shown in Figure 5.
Figure 5: Typical integration of a Hiberband modem with an application host processor
Parameter Description Typical Tolerance
A Module length 27.0 mm +0.2/-0.2 mm
B Module width 27.0 mm +0.2/-0.2 mm
H Module height 4.2 mm +0.3/-0.1 mm
Table 12: Module dimensions
H
A
B
VREF
WKUP
SYS_TXD
SYS_RXD
RESET
TXD
RXD
GPIO
GPIO
VCC
+3.3V
VCC
+3.3V
host application
processor
DBG_TXD
DBG_RXD
Hiberband modem
optional