Boost Your Bars User Manual Plus Series 4K Plus 10K Plus
Table of Contents Package Content ..............................................................................2 Introduction .....................................................................................3 How Signal Boosters Work...............................................................3 Pre-Installation Instructions.............................................................4 Signal Supervisor App Setup ............................................................
Package Content Product Image Product Name 4K Plus 10K Plus Model F10GI-5S-BTW F15GI-5S-BTW Coverage size 1,000 – 4,000 Sq. Ft. 4,000 – 10,000 Sq. Ft. Outdoor Cable 50ft Low-loss HiBoost 200 Cable Outdoor Antenna Wide-Band Directional Panel Antenna Antenna Adapter SMA-Male to N-Female Adapter Available Indoor Antenna Expansion Kits HiBoost Omni Antenna Kit HiBoost Panel Antenna Kit NOTE: Available accessories can be purchased through HiBoost.
Introduction Thanks again for purchasing HiBoost’s Plus Signal Booster. The Plus Series is a collection of precision-engineered products that improve cellular reception inside of homes and businesses by amplifying incoming and outgoing cell phone signals. The Plus booster features a built-in indoor antenna so that users can boost signal directly from the unit within minutes of set up. The unit can also provide the flexibility of doubling indoor coverage with a secondary antenna.
Pre-Installation Instructions HiBoost’s Plus booster unit and antennas must be strategically placed in order to perform and provide maximum coverage. The Plus booster features a built-in indoor antenna and an expansion indoor antenna port so users can customize their solution. Note: The Plus booster can split amplified signal twice – please review the antenna expansion methods for more information The HiBoost Signal Supervisor app will allow users to communicate to the Plus signal booster via Wi-Fi.
Built-in Antenna Method Optional Antenna Methods 5
Signal Supervisor App Setup Before installing the Signal Supervisor App, please have the booster unit that is powered on and nearby. Note: Turn on the Bluetooth feature enabled before attempting to register the booster to the mobile device.
Installation – Signal Supervisor Method Log into the Signal Supervisor app and power on your booster before beginning the installation process. The “Quick installation Guide” can be found on the app and it will help guide users through a fast and optimize installation. Access the Quick Installation Guide after registering the booster or go to: My Devices > Select the Booster > Device Details > Quick Install Guide Follow the step-by-step instructions while installing and optimizing the booster system.
Installation – LCD Display Method These are instructions that will allow users to install a Plus cell phone booster using the LCD Display. Before using this method, please take a moment to become familiar with the LCD display, LED status indicators and control buttons on the booster.
Installation Overview Before beginning the installation, it is important that users survey and plan the layout of the cell phone signal booster system. Please review the following instructions before attempting to install this system. In this set up, the user will need to use the outdoor antenna to find the strongest source of nearby cellular signal (generally in the direction of the nearest cell phone tower).
2. 3. Place the booster in a location where it will be potentially installed and make sure that the booster is turned on – ensure that there is at least 20 ft of separation between the Plus booster and outdoor antenna Carry the outdoor antenna to the highest point on the roof to begin testing Note: Do not connect any additional indoor antenna to the booster while trying to find strongest source of outdoor signal 4.
1 1 to 2-inch Diameter Mast 2 L-bracket U-bolt nut & washer Nut Bracket 3 Waterproof tape 5.
3.
Part C) Finalize the Installation Finalize the booster, antenna and coaxial installation by using the mounting hardware included in this kit. 1. Loosely run the coaxial cable from the indoor and outdoor antenna to the signal booster and secure all connections in the correct port Professional tips • • • • • 2.
Optional Indoor Expansion Kit The port labeled Indoor1 allows users to double their indoor coverage using an external indoor antenna while also using the internal antenna built into the booster unit. 1. To add a secondary antenna, connect the indoor antenna and coaxial cable to the port labeled Indoor 1.
Quick Troubleshooting Guide Eliminate Flashing ISO LCD Display Indicator and Quick Flashing Green, Quick Flashing Red ISO LED Indicator problems: 1. Adjust the outdoor antenna direction, keeping it away from the indoor antenna – restart the booster 2. Increase the vertical or horizontal distance between the outdoor antenna and the indoor antenna – restart booster. 3. Use metal or wall barriers to increase the isolation between the indoor and outdoor antennas – restart booster 4.
Other Troubleshooting Issues Reference the chart below to identify the current status of the booster. If there are any issues while installing a HiBoost cell phone signal booster, please contact the technical support team through the following channels: 24/7 Online Support: Create a ticket or chat via Signal Supervisor App Phone: (972) 870-5666 (M-F from 9 am – 5 pm) Email: support@hiboostusa.com Website: www.hiboost.
Authorized Accessories List 17
FCC and IC Statements FCC RF EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instruction for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC RF EXPOSURE STATEMENT The device is compliance with RF exposure limits. The minimum distance from body to use the device is 20 CM.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Technical Specifications 20
Return and Warranty Policies 30-Day Money-Back Guarantee: If for any reason the performance of any product is not acceptable, the product may be returned to the reseller within 30-days with proof of purchase. Please contact the HiBoost customer support. 3-Year Warranty: HiBoost signal boosters and kits are warranted for 3 years. HiBoost will repair or replace the unit and will cover the cost of delivery for consumers located within the continental U.S and Canada.
HiBoost 6210 N Beltline Rd. #110 Irving, TX 75063 (972) 870-5666 www.hiboost. support@hiboostusa.com com www.hiboost.