User Manual

9
Installation Overview
Before beginning the installation, it is important that users survey and plan
the layout of the cell phone signal booster system. Please review the following
instructions before attempting to install this system.
In this set up, the user will need to use the outdoor antenna to find the
strongest source of nearby cellular signal (generally in the direction of the
nearest cell phone tower). This will optimize the system by helping user install
the booster and antennas in the best position and direction.
A. Finding the Strongest Outdoor Signal
B. Install the Booster
C. Finalize the Installation
Part A) Finding the Strongest Outdoor Signal
The outdoor signal strength will affect performance. It is important that users
install the outdoor antenna in the right position, pointing at the strongest
source of signal or cell phone tower from the roof. It may help to narrow down
the location of the nearest cell phone tower by visiting www.cellreception.com
or www.antennasearch.com.
Gaining height may also help if users are in rural areas where cellular signal is
generally weaker. Two people may be required for a quick and effective
installation.
1. Connect the outdoor antenna to the booster
using the coaxial cable included in the kit –
push the cable firmly into the jack on both the
antenna and the booster, then turn the
connector sleeve clockwise until the connectors
are tight