User Manual

10
2. Place the booster in a location where it will be potentially installed and
make sure that the booster is turned on – ensure that there is at least 20 ft
of separation between the Plus booster and outdoor antenna
3. Carry the outdoor antenna to the highest point on the roof to begin testing
Note: Do not connect any additional indoor antenna to the booster while trying
to find strongest source of outdoor signal
4. While pointing the antenna towards the horizon, slowly rotate around in a
360-degree circle and find the position that shows the highest maximum
power output (dBm) and DL gain (dB) on the right-hand column on the LCD
display
Note: Maximum power and downlink gain for the 4K Plus is 10dBm/65dB and
10K Plus is 12dBm/68dB
Professional Tips:
• Keep in mind that it is normal for the output values may vary
dynamically between 1-3 dB
• To optimize the signal for one carrier, point the outdoor antenna
towards the closest cell phone tower designated to that carrier
• To optimize the signal for more than one carrier, point the outdoor
antenna between multiple towers
• Make sure to slowly turn the antenna while taking the readings so the
booster has time to adjust the reading
• Test and install the antenna at the same height where power outputs
and gain values reach the boosters maximum capacity