User's Manual

Step 4: Install the two indoor antennas

Note: It is better to have two people at this stage. One can go around to find the best

place for indoor antenna. While the other can walk around to make tests all over to make

sure every spot is covered with stable and high quality signal.

4.1 Now it’s turn to install the indoor antenna

4.2 Connect the indoor antenna with the booster’s indoor 1 port by indoor cable, and switch

on the booster.

Notes:Plus has built-in antenna so you needn't to install indoor antenna(s),pro is the

same situation but if you need more room to be covered ,follow this step(Each HiBoost

Plus/Pro series has two additional indoor antennas' port, but it should be noted that if

all of them are connected, the built-in antenna will be invalid)

Indoor Cable

30ft SMAM-NM

Indoor Antenna NFBooster