User's Manual

1. Increase the distance between the outdoor and indoor antennas

2. The outdoor and indoor antennas shall be back to back

3. Use barriers between the indoor and outdoor antennas

Again the tips to avoid the loop back

2) After finding the location, hold it there, and ask the other person to compare the gain and

power on LCD signal meter, they shall keep the same or very nearby with the photo taken

during outdoor antenna install. This is to avoid the loop back between outdoor and indoor

antennas, please move the indoor antenna till you get unchanged or slightly changed gain and

power. This step is quite crucial for the booster’s best performance.

Two requests of indoor antenna install

A. Radiation shall be good enough to cover whole space

B. Loop back shall be avoided

Might be ok