User Manual

Table Of Contents

5. After narrowing down the best location for the outdoor antenna, finalize

installation by using the hardware included in this kit and permanently

mount it onto a mast

Note: Write down the maximum power output and downlink gain values – this

will be important when installing the indoor antenna

Part B) Installing the indoor antenna(s)

While choosing a location for the indoor antenna, please keep in mind that

there must be at least 20 ft of vertical separation between the outdoor and

indoor antenna.

The panel antenna included in this kit will be mounted to the wall. It has a

coverage area that is a sector with a tilted angle.

The signal is amplified outwards from the front of the indoor antenna at a

horizontal angle of 80-degrees and a vertical angle of 70-degrees.

L-bracket

1 to 2-inch

Diameter Mast

U-bolt

Nut Bracket

1 2

Waterproof tape

nut & washer